CallGet a free quote
Case study · Industrial · Lighting & power

The Whole Unit, Lit End to End.

Industrial · BarnsleyHigh-bay LED relight + power

FRM stripped out the old, tired lighting and relit the entire unit in high-bay LED, then installed the power to match. Brighter, more even light across the floor, and a running cost that finally makes sense.

Sector
Industrial / warehousing
Location
Barnsley, South Yorkshire
Scope
High-bay LED relight + power
Environment
Large working unit
The brief

A Big Space That Was Dark, Dated and Dear to Run

The unit was still lit by the original fittings: dim in the corners, uneven across the floor and expensive to keep on all day. The brief was simple to say and harder to do: relight the whole space to a proper working level, sort the power behind it, and bring the running costs right down.

The catch was doing it in a unit that couldn’t simply shut down. Most of the work was at height, over a floor that still had to function, so it had to be planned, sequenced and kept safe around the day-to-day.

What shaped the job

  • Working at height, right across the unit
  • Keeping the unit running through the works
  • Light levels right for the work below
  • Cutting the running cost of the old lighting
What we fitted

The Full Scope, One Accountable Team

Lighting, power, controls and certification: designed, installed and signed off in-house, with no part of it handed to subcontractors.

Our electrical installation service
  1. 01

    High-Bay LED Lighting

    Lighting

    Efficient high-bay LED fittings throughout, laid out for even, glare-controlled light across the whole floor.

  2. 02

    Power Distribution

    Power

    Sub-mains, distribution boards and small power feeding the lighting and the unit's equipment.

  3. 03

    Lighting Controls

    Controls

    Zoned switching and presence control, so light is only on where and when it's needed.

  4. 04

    Containment & First-Fix

    Install

    Cable tray, trunking and conduit set out cleanly at height: built to suit an industrial space.

  5. 05

    Testing & Certification

    Compliance

    The whole installation inspected, tested and certified to BS7671, with the records to match.

The result

A Unit That’s Genuinely Better to Work In

Bright, even light from end to end, power that’s fit for the space, and efficient LED in place of the old fittings, installed around a working operation and certified to BS7671.

Brighter
Even high-bay light, floor to wall
Cheaper to run
Far lower lighting energy
Certified
Tested & signed off to BS7671
More work

Related Projects

Galvanised cable tray and containment installed by FRM across a steel-frame ceiling during first-fix.3
Commercial

Cable Containment & First-Fix

Tray, trunking and containment set out properly at first-fix on a large commercial unit.

Electrical installation work by FRM at an industrial process and energy site.4
Industrial

Process & Energy Site

Power, containment and external work across a live industrial process site.

Got an Industrial Lighting or Power Project? Get a Free Quote.